preloader
mail@uselogic.ru  +7(495) 374 68 44 Заказать звонок

Обзор

Cylindrical fuses are standard in Europe. There are a range of different cylindrical fuse links and holders that comply with the standards IEC 60269-1, -2 and -3, and which are suitable for use in industrial applications. In South West Europe they are also approved for use in residential buildings.

The cylindrical fuse holders are also approved to UL 512. The cylindrical fuse holders are tested and approved as fuse disconnectors according to the switching device standard IEC 60947-3. They are not suitable for switching loads.

Cylindrical fuse holders can be supplied with or without signal detectors. In the case of devices with signal detector, a small electronic device with LED is located behind an inspection window in the plug-in module. If the inserted fuse link is tripped, this is indicated by the LED flashing.

The switching state of the fuse holder can be signaled over a side-mounted auxiliary switch, which enables the integration of the fuses in the automation process.

Особенности

  • Devices with pole number 1P+N are available in a single modular width. This reduces the footprint by 50 %.
  • The sliding catch for type ranges 8 x 32 mm and 10 x 38 mm enables the removal of individual devices from the assembly.
  • Space for a spare fuse in the plug-in module enables the fast replacement of fuses. This saves time and money and increases plant availability.
  • A flashing LED signals that a fuse link has been tripped. This enables fast detection during runtime.

Дальнейшая информация

Mounting

Fuse holders, sizes 8 mm x 32 mm and 10 mm x 38 mm, have a sliding catch that enables the removal of individual devices from the assembly.

The infeed can be from the top or the bottom. Because the cylindrical fuse holders are fitted with the same anti-slip terminals at the top and the bottom, the devices can also be rail-mounted at the top or the bottom.

Auxiliary switches

Auxiliary switches are available for the cylindrical fuse holders. These are simply clipped onto the base using the factory-fitted brackets.

Sizes 8 mm × 32 mm and 10 mm × 38 mm:
The auxiliary switches support the remote display of the switching state ON or OFF of the fuse holder.

Sizes 14 mm × 51 mm and 22 mm × 58 mm:
The auxiliary switches support the remote display of fuse failure. However, fuse links with strikers are required for this function. When the fuse is tripped, a small striking pin - the striker - shoots out of the front of the fuse. Over an armature link in the auxiliary switch, the kinetic energy of this striker is used to switch a mini switch, which then initializes this signal over a floating contact.

preloader

58228