Frame size | Type | Dimension |
|
|
|
|
---|---|---|---|---|---|---|
100 L | 1LE15.., 1LE16.. | 389 | 193 | 100 | 196 | 2 × M32 × 1.5 |
1LE1523, 1LE1623 | 425 | 193 | 100 | 196 | 2 × M32 × 1.5 | |
112 M | 1LE15.., 1LE16.. | 382 | 195 | 112 | 226 | 2 × M32 × 1.5 |
1LE1523, 1LE1623 | 409 | 195 | 112 | 226 | 2 × M32 × 1.5 | |
132 S/ | 1LE15.., 1LE16.. | 457 | 215 | 132 | 256 | 2 × M32 × 1.5 |
1LE1523-, LE1623- | ||||||
1CA0, 1CC0, 1CC2 | 458 | 215 | 132 | 256 | 2 × M32 × 1.5 | |
1CA1, 1CB0, 1CB2, 1CC3 | 508 | 215 | 132 | 256 | 2 × M32 × 1.5 | |
160 M/ | 1LE15.., 1LE16.. | 594 | 265 | 160 | 300 | 2 × M40 × 1.5 |
160 M | 1LE1523, 1LE1623 | 596 | 261 | 160 | 300 | 2 × M40 × 1.5 |
160 L | 1LE1523, 1LE1623 | 656 | 261 | 160 | 300 | 2 × M40 × 1.5 |
180 M | 1LE15.1-, 1LE16.1- | |||||
1EA2, 1EB2 | 668 | 286 | 180 | 339 | 2 × M40 × 1.5 | |
1EA6 | 698 | |||||
1LE15.3-, 1LE16.3- | ||||||
1EB2 | 668 | 286 | 180 | 339 | 2 × M40 × 1.5 | |
1EA2 | 698 | |||||
180 L | 1LE15.1-, 1LE16.1- | |||||
1EB4, 1EC4, 1EC6 | 668 | 286 | 180 | 339 | 2 × M40 × 1.5 | |
1EB6 | 698 | |||||
1LE15.3-, 1LE16.3- | ||||||
1EC4 | 668 | 286 | 180 | 339 | 2 × M40 × 1.5 | |
1EB4 | 698 | |||||
200 L | 1LE15.1-, 1LE16.1- | |||||
2AA4, 2AA5, 2AB5, 2AC4, 2AC5 | 721 | 315 | 200 | 378 | 2 × M50 × 1.5 | |
2AA6 | 746 | |||||
1LE15.3-, 1LE16.3- | ||||||
2AA4, 2AC4 | 721 | 315 | 200 | 378 | 2 × M50 × 1.5 | |
2AA5, 2AB5, 2AC5 | 746 | |||||
225 S | 1LE15.1-, 1LE16.1- | |||||
2BB0, 2BD0 | 788 | 338 | 225 | 436 | 2 × M50 × 1.5 | |
1LE15.3-, 1LE16.3- | ||||||
2BB0 | 788 | 338 | 225 | 436 | 2 × M50 × 1.5 | |
225 M | 1LE15.1-, 1LE16.1- | |||||
2BA2, 2BA6 | 818 | 338 | 225 | 436 | 2 × M50 × 1.5 | |
2BB2, 2BB6, 2BC2, 2BC6, 2BD6 | 848 | |||||
1LE15.3-, 1LE16.3- | ||||||
2BA2 | 818 | 338 | 225 | 436 | 2 × M50 × 1.5 | |
2BB2, 2BC2 | 848 | |||||
250 M | 1LE15.1-, 1LE16.1- | |||||
2CA2, 2CA6, 2CB2, 2CC2, 2CC6, 2CD2, 2CD6 | 887 | 410 | 250 | 490 | 2 × M63 × 1.5 | |
2CB6 | 957 | |||||
1LE15.3-, 1LE16.3- | ||||||
2CA2, 2CB2, 2CC2 | 887 | 410 | 250 | 490 | 2 × M63 × 1.5 | |
280 S | 1LE15.1-, 1LE16.1- | |||||
2DA0, 2DB0, 2DC0, 2DD0 | 960 | 433 | 280 | 540 | 2 × M63 × 1.5 | |
1LE15.3-, 1LE16.3- | ||||||
2DA0, 2DB0, 2DC0 | 960 | 433 | 280 | 540 | 2 × M63 × 1.5 | |
280 M | 1LE15.1-, 1LE16.1- | |||||
2DA2, 2DB2, 2DC2, 2DC6, 2DD2, 2DD6 | 960 | 433 | 280 | 540 | 2 × M63 × 1.5 | |
2DA6, 2DB6 | 1070 | |||||
1LE15.3-, 1LE16.3- | ||||||
2DC2 | 960 | 433 | 280 | 540 | 2 × M63 × 1.5 | |
2DA2, 2DB2 | 1070 | |||||
315 S | 1LE15.1-, 1LE16.1- | |||||
3AA0 | 1052 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AB0, 3AC0, 3AD0 | 1082 | |||||
1LE15.3-, 1LE16.3- | ||||||
3AA0 | 1052 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AB0, 3AC0 | 1082 | |||||
315 M | 1LE15.1-, 1LE16.1- | |||||
3AC2, 3AD2 | 1082 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AA2 | 1217 | |||||
3AB2 | 1247 | |||||
1LE15.3-, 1LE16.3- | ||||||
3AA2 | 1217 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AB2, 3AC2 | 1247 | |||||
315 L | 1LE15.1-, 1LE16.1- | |||||
3AA4 | 1217 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AB4, 3AC4, 3AC5, 3AD4, 3AD5, 3AD6 | 1247 | |||||
3AA5, 3AA6 | 1372 | |||||
3AB5, 3AB6, 3AC6 | 1402 | |||||
1LE15.3-, 1LE16.3- | ||||||
3AA4 | 1217 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AB4, 3AC4 | 1247 | 515 | 315 | 610 | 2 × M63 × 1.5 | |
3AA5 | 1372 | |||||
3AB5, 3AC5, 3AC6 | 1402 |
Dimension designation | ISO fit DIN ISO 286-2 | |
---|---|---|
D, DA | to 30 | j6 |
N | to 250 | j6 |
F, FA | h9 | |
K | H17 | |
S | flange (FF) | H17 |
The drilled holes of couplings and belt pulleys should have an ISO fit of at least H7.
Dimension designation | Dimension | Admissible deviation |
---|---|---|
H | to 250 | -0.5 |
E, EA | -0.5 |
Keyways and feather keyways (dimensions GA, GC, F and FA) are made in compliance with DIN 6885 Part 1.
(part of the DT Configurator)
A dimensional drawing can be created in the DT Configurator for every configurable motor. A dimensional drawing can be requested for every other motor.
When a complete Article No. is entered with or without order codes, a dimensioaln drawing can be called up under the "Documentation" tab.
These dimensional drawings can be presented in different views and sections and printed.
The corresponding dimension sheets can be exported, saved and processed further in DXF format (interchange/import format for CAD systems) or as bitmap graphics.
Online access in the Siemens Industry Mall
The DT Configurator is integrated into the Siemens Industry Mall and can be used on the Internet without installation.
German: http://www.siemens.de/dt-konfigurator
English: http://www.siemens.com/dt-configurator
Offline access in the Interactive Catalog CA 01
The DT Configurator is also integrated on the DVD of the Interactive Catalog CA 01, the offline version of the Siemens Industry Mall. CA 01 can be ordered from the relevant Siemens sales office or via the Internet: http://www.siemens.com/automation/CA01