+7 (495) 374 68 44 Заказать звонок
CAPTCHA

Обзор

Overall dimensions

Frame size

Type

Dimension
L


AD


H


AB


O

100 L

1LE15.., 1LE16..

389

193

100

196

2 × M32 × 1.5

1LE1523, 1LE1623

425

193

100

196

2 × M32 × 1.5

112 M

1LE15.., 1LE16..

382

195

112

226

2 × M32 × 1.5

1LE1523, 1LE1623

409

195

112

226

2 × M32 × 1.5

132 S/
132 M

1LE15.., 1LE16..

457

215

132

256

2 × M32 × 1.5

1LE1523-, LE1623-

 

1CA0, 1CC0, 1CC2

458

215

132

256

2 × M32 × 1.5

1CA1, 1CB0, 1CB2, 1CC3

508

215

132

256

2 × M32 × 1.5

160 M/
160 L

1LE15.., 1LE16..

594

265

160

300

2 × M40 × 1.5

160 M

1LE1523, 1LE1623

596

261

160

300

2 × M40 × 1.5

160 L

1LE1523, 1LE1623

656

261

160

300

2 × M40 × 1.5

180 M

1LE15.1-, 1LE16.1-

 

1EA2, 1EB2

668

286

180

339

2 × M40 × 1.5

1EA6

698

1LE15.3-, 1LE16.3-

 

1EB2

668

286

180

339

2 × M40 × 1.5

1EA2

698

180 L

1LE15.1-, 1LE16.1-

 

1EB4, 1EC4, 1EC6

668

286

180

339

2 × M40 × 1.5

1EB6

698

1LE15.3-, 1LE16.3-

 

1EC4

668

286

180

339

2 × M40 × 1.5

1EB4

698

200 L

1LE15.1-, 1LE16.1-

 

2AA4, 2AA5, 2AB5, 2AC4, 2AC5

721

315

200

378

2 × M50 × 1.5

2AA6

746

1LE15.3-, 1LE16.3-

 

2AA4, 2AC4

721

315

200

378

2 × M50 × 1.5

2AA5, 2AB5, 2AC5

746

225 S

1LE15.1-, 1LE16.1-

 

2BB0, 2BD0

788

338

225

436

2 × M50 × 1.5

1LE15.3-, 1LE16.3-

 

2BB0

788

338

225

436

2 × M50 × 1.5

225 M

1LE15.1-, 1LE16.1-

 

2BA2, 2BA6

818

338

225

436

2 × M50 × 1.5

2BB2, 2BB6, 2BC2, 2BC6, 2BD6

848

1LE15.3-, 1LE16.3-

 

2BA2

818

338

225

436

2 × M50 × 1.5

2BB2, 2BC2

848

250 M

1LE15.1-, 1LE16.1-

 

2CA2, 2CA6, 2CB2, 2CC2, 2CC6, 2CD2, 2CD6

887

410

250

490

2 × M63 × 1.5

2CB6

957

1LE15.3-, 1LE16.3-

 

2CA2, 2CB2, 2CC2

887

410

250

490

2 × M63 × 1.5

280 S

1LE15.1-, 1LE16.1-

 

2DA0, 2DB0, 2DC0, 2DD0

960

433

280

540

2 × M63 × 1.5

1LE15.3-, 1LE16.3-

 

2DA0, 2DB0, 2DC0

960

433

280

540

2 × M63 × 1.5

280 M

1LE15.1-, 1LE16.1-

 

2DA2, 2DB2, 2DC2, 2DC6, 2DD2, 2DD6

960

433

280

540

2 × M63 × 1.5

2DA6, 2DB6

1070

1LE15.3-, 1LE16.3-

 

2DC2

960

433

280

540

2 × M63 × 1.5

2DA2, 2DB2

1070

315 S

1LE15.1-, 1LE16.1-

 

3AA0

1052

515

315

610

2 × M63 × 1.5

3AB0, 3AC0, 3AD0

1082

1LE15.3-, 1LE16.3-

 

3AA0

1052

515

315

610

2 × M63 × 1.5

3AB0, 3AC0

1082

315 M

1LE15.1-, 1LE16.1-

 

3AC2, 3AD2

1082

515

315

610

2 × M63 × 1.5

3AA2

1217

3AB2

1247

1LE15.3-, 1LE16.3-

 

3AA2

1217

515

315

610

2 × M63 × 1.5

3AB2, 3AC2

1247

315 L

1LE15.1-, 1LE16.1-

 

3AA4

1217

515

315

610

2 × M63 × 1.5

3AB4, 3AC4, 3AC5, 3AD4, 3AD5, 3AD6

1247

3AA5, 3AA6

1372

3AB5, 3AB6, 3AC6

1402

1LE15.3-, 1LE16.3-

 

3AA4

1217

515

315

610

2 × M63 × 1.5

3AB4, 3AC4

1247

515

315

610

2 × M63 × 1.5

3AA5

1372

3AB5, 3AC5, 3AC6

1402



Notes on the dimensions
  • Dimensional drawings according to DIN EN 50347 and IEC 60072.
  • Fits
    The shaft extensions specified in the dimension tables (DIN 748) and centering spigot diameters (DIN EN 50347) are machined with the following fits:

Dimension designation

ISO fit DIN ISO 286-2

D, DA

to 30
over 30 to 50
over 50

j6
k6
m6

N

to 250
over 250

j6
h6

F, FA

 

h9

K

 

H17

S

flange (FF)

H17



The drilled holes of couplings and belt pulleys should have an ISO fit of at least H7.

  • Dimension tolerances
    For the following dimensions, the admissible deviations are given below:

Dimension designation

Dimension

Admissible deviation

H

to 250
over 250

-0.5
-1.0

E, EA

 

-0.5



Keyways and feather keyways (dimensions GA, GC, F and FA) are made in compliance with DIN 6885 Part 1.

  • All dimensions are specified in mm.
Dimension sheet generator

(part of the DT Configurator)

A dimensional drawing can be created in the DT Configurator for every configurable motor. A dimensional drawing can be requested for every other motor.

When a complete Article No. is entered with or without order codes, a dimensioaln drawing can be called up under the "Documentation" tab.
These dimensional drawings can be presented in different views and sections and printed.
The corresponding dimension sheets can be exported, saved and processed further in DXF format (interchange/import format for CAD systems) or as bitmap graphics.

Online access in the Siemens Industry Mall

The DT Configurator is integrated into the Siemens Industry Mall and can be used on the Internet without installation.
German: http://www.siemens.de/dt-konfigurator
English: http://www.siemens.com/dt-configurator

Offline access in the Interactive Catalog CA 01

The DT Configurator is also integrated on the DVD of the Interactive Catalog CA 01, the offline version of the Siemens Industry Mall. CA 01 can be ordered from the relevant Siemens sales office or via the Internet: http://www.siemens.com/automation/CA01

55949