+7 (495) 374 68 44 Заказать звонок
CAPTCHA

Обзор

Special versions

Additional identification code -Z with order code and plain text if required

Motor protection (bearing protection)

Vorbereitet für den Anbau eines Schwingungssensors
SIPLUS CMS 1000

Q05

New!

2 × 3 Temperaturwächter für Warnung und Abschaltung

Q32

New!

Einbau von 1 Widerstandsthermometer PT100
in Ständerwicklung Zweileiterschaltung

Q62

New!

Einbau von 3 Widerstandsthermometer PT100
in Ständerwicklung Dreileiterschaltung

Q63

New!

Einbau von 6 Widerstandsthermometer PT100
in Ständerwicklung Dreileiterschaltung

Q64

New!

Einbau von 2 Einschraub-Widerstandsthermometern PT100
in Grundschaltung bei Wälzlagern

Q72

 

Einbau von 2 Einschraub-Widerstandsthermometern PT100
in Dreileiterschaltung bei Wälzlagern

Q78

New!

Einbau von 2 Doppel-Einschraub-Widerstandsthermometern PT100
in Dreileiterschaltung bei Wälzlagern

Q79

New!

Motor connection and connection box

Äußere Erdung

H04

 

Anschlusskasten auf NDE (BS)

H08

New!

Drehen des Anschlusskastens um 90°,
Einführung von DE (AS)

R10

 

Drehen des Anschlusskastens um 90°,
Einführung von NDE (BS)

R11

 

Drehen des Anschlusskastens um 180°

R12

 

Eine EMV-Kabelverschraubung

R14

New!

Eine Kabeleinführung Metall

R15

 

EMV-Kabelverschraubung, maximale Bestückung

R16

New!

Bolzenklemme für Kabelanschluss, Beipack (3 Stück)

R17

 

Kabelverschraubung, maximale Bestückung

R18

 

Schellenklemme für kabelschuhlosen Anschluss, Beipack

R19

New!

3 Leitungen frei herausgeführt, 1,5 m lang

R21

New!

6 Leitungen frei herausgeführt, 1,5 m lang

R23

New!

6 Leitungen frei herausgeführt, 3 m lang

R24

New!

Größerer Anschlusskasten

R50

 

Klemmenkasten ohne Kabeleinführungsöffnung

R51

New!

Gebohrte abnehmbare Einführungsplatte

R52

New!

Ungebohrte abnehmbare Einführungsplatte

R53

New!

Hilfsklemmenkasten Grauguss (klein)

R62

New!

Silikonfreie Ausführung

R74

 

Anormale Gewindedurchgangsbohrung
(NPT- oder G-Gewinde)1)

Y61 • and identification code

New!

Windings and insulation

Wärmeklasse 155 (F), ausgenutzt nach 155 (F),
mit Servicefaktor (SF)

N01

New!

Wärmeklasse 155 (F), ausgenutzt nach 155 (F),
mit erhöhter Leistung

N02

New!

Wärmeklasse 155 (F), ausgenutzt nach 155 (F),
mit erhöhter Kühlmitteltemperatur

N03

 

Wärmeklasse 155 (F), ausgenutzt nach 130 (B),
Kühlmitteltemperatur 45 °C, Leistungsreduzierung 4 %

N05

New!

Wärmeklasse 155 (F), ausgenutzt nach 130 (B),
Kühlmitteltemperatur 50 °C, Leistungsreduzierung 8 %

N06

 

Wärmeklasse 155 (F), ausgenutzt nach 130 (B),
Kühlmitteltemperatur 55 °C, Leistungsreduzierung 13 %

N07

New!

Wärmeklasse 155 (F), ausgenutzt nach 130 (B),
Kühlmitteltemperatur 60 °C, Leistungsreduzierung 18 %

N08

New!

Wärmeklasse 180 (H) bei Bemessungsleistung
und max. KT 60 °C

N11

 

Erhöhte Luftfeuchte/Temperatur mit 30 bis 60 g Wasser
pro m3 Luft

N20

 

Erhöhte Luftfeuchte/Temperatur mit 60 bis 100 g Wasser
pro m3 Luft

N21

 

Wärmeklasse 155 (F), ausgenutzt nach 130 (B)
mit höherer Kühlmitteltemperatur und/oder Aufstellungshöhe

Y50 • and specified output, CT .. °C or SA …. m above sea level

New!

Wärmeklasse 155 (F), ausgenutzt nach 155 (F),
andere Anforderungen

Y52 • and specified output, CT .. °C or SA …. m above sea level

New!

Wärmeklasse 180 (H), ausgenutzt nach 155 (F)

Y75 • and specified output, CT .. °C or SA …. m above sea level

New!

Colors and paint finish

Ohne Farbanstrich (GG grundiert)

S00

 

Ohne Farbanstrich, jedoch grundiert

S01

 

Sonderanstrich seeluftfest

S03

New!

Sonderanstrich Offshore

S04

New!

Innenlackierung (Metallteile; Rotor und Stator)

S05

New!

Sonderanstrich in RAL 7030 steingrau

S10

 

Sonderanstrich in Sonder-RAL-Farbtönen

Y51 • and special finish RAL ….

 

Normalanstrich in anderen Standard-RAL-Farbtönen

Y53 • and standard finish RAL ….

 

Sonderanstrich in anderen Standard-RAL-Farbtönen

Y54 • and special finish RAL ….

 

Modular technology – Basic versions

Mounting of brake

F01

 

Backstop, counter-clockwise motion blocked, clockwise direction of rotation

F40

New!

Backstop, clockwise motion blocked, counter-clockwise direction of rotation

F41

New!

Mounting of separately driven fan

F70

 

Mounting of 1XP8 012-10 (HTL) rotary pulse encoder

G01

 

Mounting of 1XP8 012-20 (TTL) rotary pulse encoder

G02

 

Modular technology – Additional versions

Brake supply voltage 24 V DC

F10

 

Brake supply voltage, 230 V AC, 50/60 Hz

F11

 

Brake supply voltage, 400 V AC, 50/60 Hz

F12

 

Mechanical manual brake release with lever (no locking)

F50

 

Special technology

 

Mounting of LL 861 900 220 rotary pulse encoder

G04

 

Mounting of HOG 9 D 1024 I rotary pulse encoder

G05

 

Mounting of HOG 10 D 1024 I rotary pulse encoder

G06

 

Mounting of POG10D rotary pulse encoder

G07

New!

Mounting of POG9 rotary pulse encoder

G08

New!

Second external grounding

H70

New!

Mounting of a special type of rotary pulse encoder

Y70 • and encoder designation

New!

Mechanical design and degrees of protection

Low-noise version for 2-pole motors with clockwise direction of rotation

F77

New!

Low-noise version for 2-pole motors with counter-clockwise direction of rotation

F78

New!

Prepared for mountings, center hole only

G40

New!

Prepared for mountings with D12 shaft

G41

New!

Prepared for mountings with D16 shaft

G42

New!

Protective cover for encoder (supplied loose – only for mountings with
order codes G40, G41 and G42)

G43

New!

Protective cover

H00

 

Screwed-on (instead of cast) feet

H01

 

Vibration-proof version

H02

New!

Condensation drainage holes sealed

H03

 

Rust-resistant screws (externally)

H07

 

IP65 degree of protection

H20

 

IP54 degree of protection

H21

New!

IP56 degree of protection

H22

 

Drive-end seal for flange-mounting motors, oil-tight to 0.1 bar

H23

 

Grounding brush for converter-fed operation
(for frame sizes 280 to 315)

L52

New!

Next larger standard flange

P01

 

Next smaller standard flange

P02

 

Coolant temperature

Coolant temperature -50 to +40 °C

D02

New!

Coolant temperature -40 to +40 °C

D03

 

Coolant temperature -30 to +40 °C

D04

New!

Designs in accordance with standards and specifications

Electrical according to NEMA MG1-12

D30

 

Design according to UL with "Recognition Mark"

D31

 

China Energy Efficiency Label

D34

 

Canadian regulations (CSA)

D40

New!

Bearings and lubrication

Located bearing DE

L20

 

Located bearing NDE

L21

New!

Bearing design for increased cantilever forces

L22

 

Regreasing device

L23

 

Hot bearing grease

L24

New!

Special bearing for DE and NDE, bearing size 63

L25

 

Bearing for DE and NDE of type 63XX

L28

New!

Bearing insulation DE

L50

 

Bearing insulation NDE

L51

 

Measuring nipple for SPM shock pulse measurement for bearing inspection

Q01

 

Balance and vibration quantity

Vibration quantity level B

L00

 

Full-key balancing

L02

New!

Balancing without feather key, feather key is supplied

L01

New!

Shaft and rotor

Shaft extension with standard dimensions, without feather keyway

L04

New!

Second standard shaft extension

L05

 

Standard shaft made of stainless steel

L06

 

Concentricity of shaft extension in accordance with DIN 42955 Tolerance R,
see section "Shaft and rotor"

L07

 

Concentricity of shaft extension, coaxiality and linear movement in accordance
with DIN 42955 Tolerance R for flange-mounting motors, see section "Shaft and rotor"

L08

 

Non-standard cylindrical shaft extension, DE

Y58 • and identification code

New!

Non-standard cylindrical shaft extension, NDE

Y59 • and identification code

New!

Special shaft steel

Y60 • and identification code

New!

Heating and ventilation

Sheet metal fan cover

F74

 

Metal external fan

F76

 

Anti-condensation heating for 230 V

Q02

 

Anti-condensation heating for 115 V

Q03

 

Separately driven fan with non-standard voltage and/or frequency

Y81 • and identification code

New!

Rating plate and extra rating plates

Extra rating plate for voltage tolerance

B07

 

Second rating plate, supplied loose

M10

 

Rating plate, stainless steel

M11

 

Extra rating plate or rating plate with deviating rating plate data
(rated data only, e.g. voltage, output, speed)

Y80 • and identification code

 

Extra rating plate with identification codes

Y82 • and identification code

 

Additional information on rating plate and on package label
(max. 20 characters)

Y84 • and identification code

 

Adhesive label, supplied loose
(printed with: Article No., serial number; 2 lines of text)

Y85 • and identification code

New!

Extension of the liability for defects

Extension of the liability for defects by 12 months to a total of 24 months
(2 years) from delivery

Q80

 

Extension of the liability for defects by 24 months to a total of 36 months
(3 years) from delivery

Q82

 

Packaging, safety notes, documentation and test certificates

Acceptance test certificate 3.1 in accordance with EN 10204

B02

 

Printed German/English operating instructions enclosed

B04

New!

Document – Electrical data sheet

B60

 

Document – Order dimensional drawing

B61

 

Standard test (routine test) with acceptance

B65

New!

Type test with heat run for horizontal motors, with acceptance

B83

New!

Connected in star for dispatch

M01

New!

Connected in delta for dispatch

M02

New!



1) G thread = Parallel Whitworth threaded pipe DIN ISO 228 (DIN 259) BSP (British Standard Pipe Parallel) Threaded pipe for connections not sealedin the thread (cylindrical), external = G.

Опции

Скачать в формате PDF

Дополнительно

Slide rails with fixing bolts and tensioning screws according to DIN 42923

Slide rails are used to tension the belt of a machine easily and conveniently when a belt tightener is not available. They are fixed to the base using stone bolts or foundation blocks.

The assignment of slide rails to motor size can be found in DIN 42923. For motors of frame sizes 355 to 450, there are no standardized slide rails (please inquire).

Source of supply:

Lütgert & Co. GmbH
Postfach 42 51
333276 Gütersloh, Germany
Tel. +49 (0)5241-74 07-0
Fax +49 (0)5241-74 07-90

http://www.luetgert-antriebe.de
E-mail: info@luetgert-antriebe.de

Foundation block according to DIN 799

The foundation blocks are inserted into the stone foundation and embedded in concrete. They are used for fixing machines of medium size, slide rails, pedestal bearings, baseframes, etc. After the fixing bolts have been unscrewed, the machine can be dragged without it having to be lifted.

When the machine is initially installed, the foundation block that is bolted to the machine (without washers) and fitted with tapered pins is not embedded with concrete until the machine has been fully aligned. The machine is set 2 to 3 mm deeper in this case. The difference in shaft height is compensated by inserting shims on final installation. The tapered pins safeguard the exact position of the machine when it is repeatedly removed and replaced without the need for realignment.

Source of supply:

Lütgert & Co. GmbH
Postfach 42 51
33276 Gütersloh, Germany
Tel. +49 (0)5241-74 07-0
Fax +49 (0)5241-74 07-90

http://www.luetgert-antriebe.de
E-mail: info@luetgert-antriebe.de

Taper pins to DIN 258 with threaded ends and constant taper lengths

Taper pins are used for components that are repeatedly removed. The drilled hole is ground conical using a conical reamer until the pin can be pushed in by hand until the cone shoulder lies approx. 3 to 4 mm above the rim of the hole.

It can then be driven in using a hammer until it is correctly seated. The pin is removed from the drilled hole by screwing on the nut and tightening it.

Standardized taper pins are available from general engineering suppliers.

Source of supply, for example:

Otto Roth GmbH & Co. KG
Rutesheimer Straße 22
70499 Stuttgart, Germany
Tel. +49 (0)711-13 88-0
Fax. +49 (0)711-13 88-233

http://www.ottoroth.de
E-mail: info@ottoroth.de

Couplings

The motor from Siemens is connected to the machine or gear unit through a coupling. Siemens is an important coupling manufacturer with a wide range of products.

For standard applications, Siemens recommends that elastic couplings of types N-EUPEX and RUPEX or torsionally rigid couplings of types ARPEX and ZAPEX are used. For special applications, FLUDEX and ELPEX-S couplings are recommended.

Source of supply:

Siemens contact partner - ordering from Catalog Siemens MD 10.1 "FLENDER Standard Couplings"

or

SIEMENS AG
Kupplungswerk Mussum
Industriepark Bocholt
Schlavenhorst 100
46395 Bocholt, Germany
Tel. +49 (0)2871-92 21 85
Fax +49 (0)2871-92 25 79

http://www.siemens.com
E-mail: flendercouplings@siemens.com

Дальнейшая информация

Spare motors and repair parts
  • Supply commitment for spare motors and repair parts following delivery of the motor:
    • For up to 5 years, in the event of total motor failure, Siemens will supply a comparable motor with regard to the mounting dimensions and functions (the type series may vary).
    • Spare parts will be available for up to five years.
    • Within the time period of up to five years, Siemens will provide information about spare parts and will supply documents when required.
    • Replacement motors delivered after the active production of the machine series are also identified with "Spare motor" on the rating plate. Spare parts are offered only on request for these motors.
  • When repair parts are ordered, the following details must be provided:
    • Designation and part number
    • Article No. and factory number of the motor.

Example for ordering a fan cover 1LE1002,
frame size 112 M, 4-pole:

Fan cover No. 7.40,
1LE1002-1BB23-4AA4-Z, factory No. E1001/5236197_01_001

  • For bearing types, see Catalog D 81.1  ·  2013, Section 1 "Introduction".
  • Repair parts for 1MJ6, 1MJ7, 1MJ8, 1MJ1, 1ME8, 1ML8 motors are available on request.
  • For standard components, a supply commitment does not apply.
  • Support – Hotline
    In Germany
    Tel. +49 (0)1 80/5 05 04 48

You will find telephone numbers for other countries on our internet site:
http://www.siemens.com/automation/service&support

55948